Grade Control Systems
--------------------------------------------------------------------------------
GCS300 Grade Control System
The Trimble® GCS300 Grade Control System is a single elevation control system designed primarily for use on dozers. It uses the Trimble LR410 Laser Receiver to control the lift of the machine blade.
--------------------------------------------------------------------------------
GCS400 Grade Control System
Designed primarily for use on dozers, the Trimble® GCS400 Grade Control System is a dual elevation, or elevation and blade slope control system that controls both the lift and tilt of the machine blade.
--------------------------------------------------------------------------------
GCS500 Grade Control System
The Trimble® GCS500 Grade Control System is a cross-slope control system designed to be used on motor graders for fine grading work.
--------------------------------------------------------------------------------
GCS600 Grade Control System
The Trimble® GCS600 Grade Control System is a highly flexible cross-slope and elevation control system designed to be used on motor graders for fine grading work.
--------------------------------------------------------------------------------
GCS600 Grade Control System for Excavators
The Trimble® GCS600 Grade Control System for Excavators is a highly flexible laser-based system designed for excavation, trenching, grading and profile work. The Trimble GCS600 is idea for earthmoving, site preparation and general contractors looking for a flexible, economical, and easy-to-use grade control system to improve their productivity and profitability.
--------------------------------------------------------------------------------
CCS 900 Compaction Control System
The Trimble® CCS900 Compaction Control System is the first satellite-based positioning solution to offer contractors the ability to compact surface material to a target density and check finished grade accuracy in the same process.
--------------------------------------------------------------------------------
GCS900 Grade Control System
The Trimble GCS900 Grade Control System is an automatic control system that puts design surfaces, grades and alignments inside the cab. The system uses the MS980 smart antenna - a fully integrated GPS receiver and antenna - mounted to each end of the machine's blade. The system can be operated in a completely stakeless environment to grade to an accuracy of 20-30 millimeters (0.1 foot).
GCR Grade Control Receiver ---------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------
The Trimble Grade Control Receiver (GCR) is a cost-effective laser-based machine control system that can significantly improve the productivity and accuracy of grading equipment by as much as 50% over conventional methods. Used primarily for finishing grade on sites and for foundations, the GCR family of laser receivers is easy to learn. With minimal training, even inexperienced operators are able to get up to speed in no time at all.
The modular Trimble ScreedPro® System is the ideal choice for improved productivity and accuracy when laying road and runway asphalt. ScreedPro is a non-contact control system for laying asphalt that plugs directly into the automatic control system on Asphalt Pavers and Milling Machines. The configurable paving system can be set up with one or more of Trimble's positioning sensors Tracer Plus, the Slope Module and a Laser Receiver to meet your needs.
Apache Bullseye Machine Control Receivers
With a Bullseye on your machine the operator becomes an instant grade checker. You can add a remote display so the operator can view grade information from the cab. Get a quick, secure mount with no welding with a magnetic mount. Its heavy-duty magnets keep the receiver in place.
